In view of the high energy consumption, the inability to dry with ink, the low speed of the machine, and the high cost of replacing the ink printing machine or changing the oven and other pain points in the soft bag industry, Jinchuang has specially developed and produced the special dryer equipment for ink printing, with the following advantages:

(1) Under the same conditions, the drying efficiency will increase by 30% when the humidity decreases by 10%, which is more than 3 times of the traditional drying efficiency

(2) When the humidity decreases, the air volume of solvent ink printing can be used to dry the ink printing after considering the air volume factor.

(3) Properly raise the temperature within the range that the printed product can bear

(4) There is no need to make any changes to the original printing machine body. Just connect the Jinchuang ink drying system to the printing machine oven with air duct, replace the original heating and air supply parts, and then use it. It is very simple and convenient, complete the upgrading of oil to water at the minimum cost, and take into account the drying of solvent ink brush. The air volume and temperature requirements are lower