In order to better break through the current bottleneck in the field of packaging and printing, Guangzhou Jinchuang Environmental Technology Co., Ltd. has spared no effort to create an ink dehumidification dryer equipment, which has been officially accepted and put into use by Dalian Wanxin Plastic Packaging Co., Ltd., a well-known packaging and printing enterprise in the northeast.

As a veteran in this field for many years, our company finally chose to break through the traditional solution through continuous experiment, research and analysis - transfer on the original air reduction and concentration equipment. The relevant person in charge said that the original equipment was too limited to be dried by the equipment of reducing wind and thickening, and the equipment of reducing wind and thickening was not suitable for ink printing color printing. Therefore, after an air duct was connected to the oven and optimized, the effect of ink printing and dehumidification was further improved! This is different from the ordinary ink dryer. The new equipment ink dryer uses 1050 mechanical shafts, 8-color printing, energy consumption of 10KWH per color, the maximum design speed of 200m per minute, and the air volume is up to 100 million to drive three types of bellows. By using a very professional setting system, the humidity can be reduced to less than 10% while ensuring normal operation. The power consumption of a group of bellows is extremely low, which can not only greatly reduce operating costs, but also achieve efficient output.

Our ink dehumidification dryer can be said to be able to dry and print. In this regard, General Manager Mao of Dalian Wanxin fully affirmed this, saying that this is a major technological innovation, also realizing the concept of energy conservation, environmental protection and green, and also opening the era of ink and wash full-color printing!

                                                          2021-9-17

Guangzhou Jinchuang Environmental Technology Co., Ltd